FORT Facility Kft. - Surface cleaning, cleaning

Boat and yacht cleaning is a specialist surface cleaning service for the external surfaces, decks and associated areas of catamarans, yachts, sailing boats, small electric boats and other watercraft. The aim of the service is to leave the vessel cleaner, better maintained and better prepared for the season or upcoming maintenance work.

Depending on the vessel and the task, we can clean the hull, deck, windows, metal surfaces, railings, anchor locker, engine compartment, storage lockers, upholstery and walking surfaces. The appropriate technology is always selected according to the vessel’s material, condition, level of contamination, location and the objective of the cleaning.

We use a range of lower-impact and, in many cases, chemical-free cleaning technologies. Reverse osmosis water is used for spot- and streak-free cleaning of glass and polished surfaces, while high-pressure water cleaning can remove accumulated outdoor contamination. Laser cleaning provides precise and controlled surface treatment, while soda blasting or dry ice blasting may be suitable for removing paint residues, algae, moss, rust or old coatings.

Reducing the environmental impact of boat cleaning is particularly important. We plan the work with due consideration for applicable Hungarian water-protection requirements, marina regulations and relevant international environmental requirements. The aim is to ensure that contamination, paint residues, old coatings or other cleaning residues removed during the work do not enter natural waters in an uncontrolled manner.

We provide boat cleaning after haul-out, before the season, as part of maintenance work or as regular cleaning during the season. Work can be carried out at marinas, repair facilities, storage sites or other previously agreed locations, depending on site conditions and environmental requirements.

Which boats and surfaces do we clean?

• Catamarans

• Yachts

• Sailing boats

• Small electric boats

• Boat hulls

• Decks

• Boat windows

• Metal surfaces

• Railings

• Anchor lockers

• Engine compartments

• Storage lockers

• Marine upholstery

• Walking and deck surfaces

• Fibreglass, plastic, steel and aluminium surfaces

Which cleaning technologies do we use?

• Reverse osmosis water cleaning

• High-pressure water cleaning

• Laser cleaning

• Soda blasting

• Dry ice blasting

• Spot- and streak-free cleaning of boat windows using purified water

• Surface preparation for antifouling coating replacement

• Removal of old paint and coating layers

• Specialist cleaning solutions adapted to the surface

• A combination of several technologies where required

What types of contamination and coatings do we remove?

• Algae

• Moss

• Limescale

• Rust

• Flaking paint

• Old coating residues

• Residues of antifouling coatings

• Environmental contamination

• Sludge and waterline deposits

• Salt and mineral deposits

• Oil and grease contamination

• Contamination caused by normal deck use

• Stains on upholstery and walking surfaces

Where do we provide boat cleaning?

• Marinas

• Boat storage facilities

• Repair workshops and boatyards

• After haul-out

• At a suitable cleaning location provided by the customer

• Throughout Budapest and across Hungary, subject to prior arrangement

Why do we recommend professional boat cleaning?

• Suitable for several types of boats and surfaces

• We use lower-impact and, in many cases, chemical-free technologies

• We offer solutions for cleaning hulls, decks, windows, metal surfaces, engine compartments and upholstery

• Reverse osmosis water can provide a spot- and streak-free finish on glass and polished surfaces

• Soda blasting, dry ice blasting and laser cleaning can be used for specific types of contamination

• The technology is adapted to the material and condition of the vessel

• Suitable for pre-season, in-season and maintenance-related cleaning

• Environmental and water-protection considerations are an integral part of our work planning

When is boat cleaning recommended?

• before the season to prepare the vessel

• after haul-out for hull cleaning

• before a racing season or period of intensive use

• before maintenance, repair or refurbishment

• for hulls affected by algae, moss or limescale

• for the removal of old paint, rust or antifouling coating residues

• for in-season cleaning of decks, windows and walking surfaces

• when the use of lower-impact cleaning technologies is an important consideration

• when the task requires a coordinated combination of several cleaning technologies

Frequently Asked Questions

When should boat cleaning be planned in relation to the season?

More thorough hull cleaning and surface preparation is best planned after haul-out, before the season or alongside maintenance work. During the season, regular cleaning tends to focus more on the deck, windows, railings and walking surfaces, helping to keep the vessel well maintained while in use.

What determines which cleaning technology can be used on a boat?

The choice depends on the material of the vessel, the condition of the surface, the type of contamination and the purpose of the cleaning. Different solutions may be appropriate for fibreglass, plastic, steel or aluminium surfaces, while algae, limescale, rust, old paint and antifouling coatings may each require a different approach.

Which environmental considerations are important when cleaning boats?

It is important to ensure that removed contamination, paint residues, old coatings, wash water or other cleaning residues do not enter natural waters in an uncontrolled manner. The work must therefore be planned according to site conditions, marina requirements and relevant water-protection considerations.

Can fibreglass or plastic boat hulls also be cleaned?

Yes, but choosing the correct technology is particularly important for these surfaces. Not every cleaning process can be applied in the same way to fibreglass, plastic or composite materials, so the condition, coating and sensitivity of the surface must be assessed before cleaning.

Why should different types of contamination not all be removed using the same method?

A vessel may have several different types of contamination at the same time, including algae, moss, limescale, rust, paint residues, oily deposits or stains caused by deck use. These adhere to surfaces in different ways. A method that is too mild may not be effective, while an overly aggressive process may damage the surface. Selecting the appropriate technology is therefore essential.

What determines the cost of boat cleaning?

The price depends on the size, type and material of the vessel, the area to be cleaned, the level of contamination, the selected technology and site conditions. It also depends on whether the requirement is limited to deck or window cleaning, involves a complete hull clean, or includes the removal of old coatings.

Choosing the right boat cleaning technology can result in significant time and cost savings.

For more than 35 years, we have been helping our clients select the most effective surface cleaning and specialist cleaning solutions throughout Budapest and across Hungary.

Contact us and request a quotation