FORT Facility Kft. - Surface cleaning, cleaning

Chemical surface cleaning

Chemical surface cleaning is a specialist cleaning process used to remove oily, greasy, organic and limescale deposits in industrial, institutional and facility-management environments. The cleaning method is always adapted to the material and condition of the surface, the level of contamination and the objective of the cleaning task.

During the process, we use a cleaning solution selected specifically for the application, which may be alkaline, acidic or another specialist cleaning agent suited to the particular surface. The appropriate dilution ratio, dwell time and working method are determined according to the manufacturer’s instructions, the sensitivity of the surface and the type of contamination.

The cleaning agent is applied to the surface and, after the required dwell time, the loosened or dissolved contamination is removed manually, using mechanical equipment or with additional mechanical action. The process also includes the collection of dissolved contamination and, where necessary, rinsing or neutralising the treated surface.

Chemical surface cleaning can be used on floor tiles, concrete surfaces, industrial hall structures, machinery, equipment and selected textile surfaces. When cleaning carpets and upholstery, we always select the cleaning agent and process according to the material and colourfastness of the textile.

Which surfaces can be cleaned using chemical cleaning?

• Floor tiles

• Concrete surfaces

• Machines and equipment

• Industrial hall structures

• Industrial flooring

• Operational and production surfaces

• Surfaces in workshops and manufacturing areas

• Selected carpets and textile surfaces, subject to prior assessment

• Surfaces affected by oil or grease contamination

• Surfaces with limescale deposits

What types of cleaning tasks do we carry out?

• Degreasing with alkaline cleaning agents

• Descaling with acidic cleaning agents

• Chemical floor tile cleaning

• Chemical concrete cleaning

• Chemical cleaning of machines and equipment

• Chemical cleaning of industrial hall structures

• Loosening oily and greasy deposits

• Removing organic contamination

• Surface cleaning using the appropriate dwell time

• Cleaning with manual or mechanical agitation

• Collection of dissolved contamination

What types of contamination can be removed with chemical surface cleaning?

• Oil

• Grease

• Organic contamination

• Limescale deposits

• Industrial surface deposits

• Stubborn contamination caused by regular use

• Deposits adhering to machinery and flooring

• Greasy or oily layers originating from industrial operations

• Deposits found on floor tiles and concrete surfaces

Why do we recommend chemical surface cleaning?

• Can be effective against oil, grease and limescale contamination

• The cleaning agent is selected according to the surface and type of contamination

• Both alkaline and acidic cleaning solutions are available

• Suitable for floor tiles, concrete surfaces, machinery and industrial hall structures

• Can be combined with manual and mechanical cleaning methods

• Can be effective where mechanical cleaning alone is insufficient

• Suitable for industrial, institutional and operational environments

• The dilution, dwell time and working method are adapted to the specific task

• Available throughout Budapest and across Hungary

When is chemical surface cleaning recommended?

• for removing oil and grease deposits

• for treating surfaces affected by limescale

• for the thorough cleaning of floor tiles, concrete surfaces and industrial flooring

• for the surface cleaning of machines and equipment

• for removing contamination from industrial hall structures

• when mechanical cleaning alone cannot remove the contamination effectively

• when targeted degreasing or descaling action is required

• when the surface is being prepared for further treatment, maintenance or refurbishment

Frequently Asked Questions

Why are the correct dilution ratio and dwell time important?

Both the effectiveness of the cleaning agent and the safety of the surface depend on the correct dilution and dwell time. A solution that is too weak may not dissolve the contamination effectively, while a solution that is too strong or left on the surface for too long may damage the material. For this reason, the parameters are always adapted to the specific surface and contamination.

When is a test clean recommended before chemical treatment?

A test clean is recommended when the surface is sensitive, made of an unknown material, has been treated previously, is prone to discolouration or when its reaction to the cleaning agent is uncertain. This is particularly important for textile surfaces, painted surfaces, natural stone and older floor or wall coverings.

Why must dissolved contamination be collected?

During chemical cleaning, the cleaning agent loosens or dissolves the contamination, but the resulting residue must still be removed from the surface. If this step is omitted, the contamination may dry back onto the surface, cause staining or adhere again to the treated area. Mechanical removal and collection are therefore important parts of the cleaning process.

What are the risks associated with acidic or alkaline cleaning agents?

Acidic and alkaline cleaning agents can be highly effective, but they are not suitable for every surface. Some materials may discolour, become dull, etch or otherwise suffer surface damage if the wrong product or concentration is used. For this reason, the material and condition of the surface are always considered when selecting the appropriate technology.

Can chemical cleaning be carried out in an operational facility?

In many cases, yes, but the work must be adapted to the operation of the site, ventilation, accessibility and safety requirements. In some situations, partial area closures, scheduled cleaning or a designated maintenance window may be required.

When is chemical surface cleaning not the most suitable solution?

If the contamination is thick, heavily bonded, burnt-on, layered or coating-like, chemical cleaning alone may not be sufficient. In such cases, we may recommend abrasive blasting, laser cleaning, dry ice blasting, high-pressure water cleaning or another specialist cleaning technology.

Choosing the right chemical surface cleaning technology can result in significant time and cost savings.

For more than 35 years, we have been helping our clients select the most effective cleaning and surface cleaning solutions throughout Budapest and across Hungary.

Contact us and request a quotation