FORT Facility Kft. - Surface cleaning, cleaning

Not every surface cleaning challenge has an off-the-shelf solution. In some cases, the type of contamination, the sensitivity of the surface, accessibility or the operating environment requires a customised approach.

With more than 35 years of experience in surface cleaning, we have encountered a wide range of industrial, institutional and facility-management challenges. In these situations, we do not start with a predefined technology. We start with the problem itself: we assess the surface, the contamination, the site conditions and the required result.

Our own workshop, technical specialists and broad range of cleaning technologies allow us to develop custom tools, specialist working methods or solutions that combine multiple technologies whenever required.

When might a custom cleaning solution be required?

• when the contamination cannot be removed using conventional methods

• when the surface is sensitive, fragile or made from an unusual material

• when the area to be cleaned is difficult to access

• when the work must be carried out in an industrial or operational environment

• when minimising downtime is a priority

• when multiple technologies may need to be combined

• when the task requires a custom tool or specialist working method

• when the problem does not fit into an existing service category

Which surface cleaning technologies can be combined?

• Laser cleaning

• Abrasive blasting

• Dry ice blasting

• High-pressure water cleaning

• Reverse osmosis water cleaning

• Drone-assisted cleaning

• Ultrasonic cleaning

• Chemical cleaning

• Specialist manual and mechanical cleaning methods

• Custom-built tools, frames and support structures, developed specifically for the task

Why do we recommend our specialist cleaning solutions?

• We focus on solving the problem rather than applying standardised solutions

• We can combine multiple technologies within a single project

• Our own workshop and technical expertise support the development of custom solutions

• We have experience in industrial, institutional and specialist environments

• We adapt the working method to the surface, contamination and site conditions

• Where required, we can design and build custom tools or develop specialist technical solutions

How do we assess custom cleaning tasks?

The first step is to understand the problem, the surface to be cleaned, the type of contamination and the working conditions. Where necessary, we carry out a site survey, examine samples or recommend a test clean. Based on these findings, we determine which technology, combination of technologies or custom solution is likely to be the most effective.

Frequently Asked Questions

What is considered a specialist cleaning requirement?

A specialist cleaning requirement can be any task that cannot be solved effectively using standard cleaning methods. Examples include sensitive surfaces, hard-to-reach areas, stubborn industrial contamination or working environments where the cleaning process must comply with specific technical requirements.

What happens if it is not clear which cleaning technology is suitable?

In these cases, we start with the problem rather than selecting a technology in advance. We assess the surface, contamination, environment and required result, and then recommend the most suitable cleaning technology or combination of technologies.

Can several technologies be combined within the same project?

Yes. For some specialist cleaning tasks, a combination of technologies provides the best result. For example, abrasive blasting may be used for initial surface preparation, followed by laser or dry ice cleaning for more precise treatment. In other cases, chemical cleaning or high-pressure water cleaning may form part of the solution.

Can custom equipment or a specialist working method be developed for a specific problem?

Yes. With our own workshop and technical specialists, we have previously designed custom tools and developed working methods tailored to specific tasks. This may be necessary when existing technologies do not provide a suitable solution on their own, or when unusual site conditions require a different approach.

Can we request a test clean or preliminary assessment?

For specialist cleaning tasks, a preliminary assessment, test clean or detailed technical consultation may often be appropriate. This helps determine which technology or combination of technologies is most suitable for the specific surface and contamination.

Choosing the right cleaning and surface treatment technology can result in significant time and cost savings.

For more than 35 years, we have been helping our clients select the most effective surface cleaning and surface treatment solutions throughout Budapest and across Hungary.

Contact us and request a quotation